Showing posts with label Glitter. Show all posts
Showing posts with label Glitter. Show all posts

Saturday, September 22, 2012

Glitter Garland with Carrie

I love to layer garlands with different textures, shapes and materials. They are very versatile and you can mix and match themes to fit any occasion.
For this project trifecta, I wanted to make a fringe garland, a chain garland and a ribbon garland with flowers.
First, I gathered all the materials I'm going to use to make the chain garland and the fringe garland. This is what I used:
  1. Black construction paper
  2. Helmar Vellum Adhesive Spray
  3. Art Institute Fine Opaque Glitter - #62 Copper Canyon Orange
  4. Art Institute Fine Opaque Glitter - #79 Black
  5. Art Institute Fine Opaque Glitter - #83 Silver
  6. Art Institute Fine Opaque Glitter - #77 Pewter
  7. White paper fringe garland
  8. Dreamweaver Stencils - I used #LX 7001 Damask
  9. Large piece of paper to spray on
First off... do this outside! You are going to be using spray adhesive and making a mess.
I started by spraying the paper fringe garland liberally with the Vellum Adhesive spray.
I then sprinkled the sprayed area with glitter and kept spraying, sprinkling glitter and rolled it around in the excess glitter. The Vellum spray was really neat because it made the white tissue garland paper turn more opaque and frosted, so the finished garland had a really neat vellum look to it.
I set the paper fringe garland aside to dry. I then moved on to the next project... I set out a piece of the black construction paper and sprayed it liberally with the Vellum adhesive spray...
And quickly set a stencil on top of the sprayed area. I then sprinkled the silver glitter carefully over the exposed area of the stencil. Then I carefully removed the stencil, tapped off the excess and covered the remaining exposed paper with black glitter.
It wasn't perfect, but it did give me enough of that Damask pattern to work with. I did this with 3 more sheets of paper using all my glitter colors. I left everything on my front porch to dry while I retreated into my office to start the flowers for the 3rd garland.
To make the flowers I used the following:
  1. Orange construction paper. 4 sheets in different shades of orange.
  2. Helmar Gemstone Glue
  3. Helmar 450 Quick Dry Adhesive
  4. Art Institute Glitter - D14 Gunmetal Gray Dazzlers
  5. Art Institute Glitter - D59 Stardance Dazzlers
  6. Black and white polka dot ribbon
  7. Lots of rhinestones
  8. Flower petal hole punch - 2 different designs
I put the flowers together, 3 petals deep and then used the Helmar Gemstone Glue to add the rhinestones and glitter on the inside of each flower.
I made about 48 flowers total.
When the flowers dried, I glued them all back to back on the black and white polka dot ribbon using the Helmar 450 Quick Dry Adhesive. I love this glue because it has the consistency of rubber cement. When making this garland, I wanted to space the flowers evenly and using this glue allowed me to move each flower before it dried. Also, the glue seeped just enough through the ribbon to help form a bond onto the other side of the ribbon. It was the perfect glue for this project. I set the flower garland aside to dry and went back to the paper chain project downstairs.
I cut the glittered construction paper into strips...
And then arranged the strips in alternating glitter colors... and glued them all together using the Helmar 450 Quick Dry Adhesive. After everything was assembled and dried, I hung them all together over a mirror in my dining room...




I have one more idea for a garland to add to this collection... another Halloween-themed garland with ghosts. The cool thing is, once Halloween is over, I can remove the garlands that scream Halloween and leave the others up for Thanksgiving. Easy to make, easy to store and very versatile!
Thanks for checking out my post.
Carrie

































Thursday, August 30, 2012

Graphic 45 and Art Glitter

This was the project I did for the Art Glitter and Graphic 45 blog hop.  I had it "done" but not really done like I like!  So here is the before and after!

How many differences can you find??  Leave a comment on this post with your guess and the winner will get a little candy! ( this tray)  We will pick a winner at random on Monday...Labor Day!

Sparkle on
Kristi

Monday, August 6, 2012

Flutter bys with Laura

 

There is a story behind this butterfly house.  (I promise I will be brief.)  I was looking for birdhouses at Michael's one day this past spring, when I saw this very interesting little house.  When I picked it up, I read the tag which said that it was a butterfly house and I immediately thought about how sad that was.  Of course, in retrospect, I realize that it is actually created to house a cocoon until the butterfly emerges and can be released.  Anyway, all I could imagine was how the butterflies I would keep in there would probably die prematurely.  Unless, of course, they weren't actually real--like if I made them from glitter!  And an idea was born.
Here is what they look like through the mesh as they are hanging up in the house.  I created them using the Double Glitter Technique that I so often reference in my blog.  I used adhesive paper and Dreamweaver Stencils LM 255, LM 256, and LM 121

Here is what the butterflies look like almost ready to go.  I soaped the back of the stencil, brushed off the excess soap, attached them to the adhesive paper and filled them with gorgeous Art Glitter.  I removed the paper from the stencil and covered it in Ultrafine Transparent 85 Crystal for all of them.  I did each one on the paper and on some clear double sided adhesive tape.  Then, I held it up to the light and attached the transparent tape to the back of the paper, lining up the butterfly.  Then, I cut around each.  On to the goodies--the colors I used.  The blue butterfly was created in this order:  Ultrafine Opaque 79 Black (placed on the stencil and pushed into place), Chunky Opaque Hologram 254 Stratosphere (for glitz), Microfine Opaque 504 Blue Diadem (for sharpness) and, of course, Ultrafine Transparent 85 Crystal for the background.  The orange and gold butterfly was created using the black, Chunky Opaque Hologram 251 Comet, Ultrafine Opaque Hologram 336 Alien, Microfine Opaque 501 Monarch, and, of course, Crystal.  The final Double Glitter project, the moth, was made with Chunky Opaque Hologram 253 Aurora, Ultrafine Opaque 157 Purple Lame, Microfine Opaque 510 Terra Blue and Crystal
For the outside of the house, I used Claudine Helmuth Studio Paint in Icy Blue to create a base coat.  Then, when it was dry, I used Adirondack Sail Boat Blue paint to stencil designs on the exterior.  I used the Dreamweaver Stencils LJ 896 and LJ 916 for this.  I sanded the whole thing lightly when it was dry.  I used the butterfly stencils with a Tsukineko Glue Pad and a stencil brush to create the glued designs.  I sprinkled on glitter in four colors:  Ultrafine Transparent 145 Blue Boy, Ultrafine Transparent 288 Deep Blue Sea, Ultrafine Transparent 142 Coral Reef and Ultrafine Transparent 94 Key Lime.  I purposely used transparent colors because I only wanted a hint of color.  I wanted the interior butterflies to be the most prominent colors, but I still wanted to add just a little interest on the outside. 
You can see how it just adds a whisper of color.
 Once I finished the exterior, I realized that I needed something a little special on the inside of the house.  First, I got a twig from outside.  I put a little Designer Dries Clear on my craft sheet and used a brush to put it on the branch.  I covered the branch in Ultrafine Opaque 323 Cool Brown glitter.  Then, I glued some Vintage Glass Glitter Shards in 902 Kryptonite on the bottom.  It was meant to represent grass, but, sadly, you don't see it in any of the photographs.  Then, I put the butterflies into their home.  I poked holes in them and added some fine fishing line to hang them.  I used a tapestry needle to guide the fishing line through the mesh and tied it when the butterflies were the height I wanted them.  Then, I added the branches into the house and put in some Fantasy Fiber in Briarwood.
Here are a couple more pictures.



I hope you enjoyed my post today.  While I am a big proponent of purchasing supplies in your local store, I am aware that many people don't have the luxury of purchasing Art Glitter locally.  There is good news for you if that is the case--you can purchase Art Glitter directly from their website!  Betcha didn't know that!  So, now you can get your glitter going, too!  Good luck!


Make sure and check out previous posts by Laura on Her Blog!