Showing posts with label Designer Dries Clear Glue. Show all posts
Showing posts with label Designer Dries Clear Glue. Show all posts

Monday, March 31, 2014

Art Glitter Flag

Heather's Project
Americana Roses

Heather decided she would like to share with you a tiny Vintage Americana Folk Art Inspired Canvas!! You will need the following:
Step One
I spread the modge podge over my entire canvas.  I wanted an antique look so I used the Antique modge podge, but you could use the Art Glitter Designer dries clear Glue in the same manner.
Step Two
Place your book page over your canvas and smooth out.  Tear off the excess edges.  You can smooth the edges over to the sides as well.  The excess will be sanded off when you are finished with your piece.
Step Three
Heather used her drawing as a reference when drawing onto her canvas.  You could use some graphite paper, place it on the canvas shiny side down, then put drawing on top, use a stylus to transfer your lines to your canvas.
Step Four
Heather used a flat brush to paint the cream stripes, then the red ones.
Step Five
Heather Free hand painted a vintage white star.
Step Six
Heather used a Round and flat brush to paint her leaves.  She watered down her paint so that the coverage would not be opaque, letting some of the book page showing through.  She sketched in a circle for the rose.
Step Seven
Heather decided she wanted some more leaves, that would wrap around the edges of the canvas.  Leaves were base coated with Classic Green.
Step Eight
Heather used the baby pink and a flat brush to paint a messy circle and used a round brush to create the basecoat for some rosebuds.  She also cut out some words from another book page and glued them down to the white stripes of the flag.  Heather also cut out words and placed them along the canvas edges too.  She then put a coat of antique Mod Podge
Step Nine 
Heather filled in the blue part of the flag, again watering down her acrylic paint.
Step Ten
Heather used her Angle Shader brush and applied red lipstick paint to the messy circle to create the rose beginning and to shade the rose buds.  She did a brush mix of the old ivy & burnt umber to shade the leaves .  She also used her Angle Shader with burnt umber to shade around all the leaves, and around the edges of the star and stripes.
Step Eleven
Heather used her round brush and brush mix of Fresh Foliage & Moon Yellow to highlight tips of leaves and create leaves for the rose buds.  She used her Angle shader with a brush mix of pink & white to create the rose.  When the paint was dry she applied some Designer dries clear glue randomly to the white stripes and star and applied Fauna Glitter. 
Step Twelve  
Heather did the same technique to the leaves applying Celery glitter, the blue she applied Dusty Blue Glitter, and Cheeky pink was added to the rose.
Finished Piece
Heather is really happy with how it turned out!!
A couple close ups
You can see below how Heather continued the painting onto the edges of her canvas.
Another Close up
One more close up
Heather hopes you enjoyed her tutorial, and hopes it adds a little Sparkle to your day!

Feel free to stop by and see Heather's other projects and Tutorials using Art Glitter on her blog.
and her 


Thursday, February 27, 2014

Spring Sparkles



Heather decided she would like to share with you a bit of spring!!  Yes it is still snowing and freezing cold in Michigan, and Heather is already eager for spring!!  So if you live in her neck of the woods or are lucky enough to live somewhere that you don't know the meaning of "snirt"  (the yucky mix of slushy snow and dirt), hopefully you will enjoy her "Spring Sparkles with Beauty" card.
You will need the following:

Here is a close up
Heather has done a youtube tutorial for you to enjoy.

Heather hopes you enjoyed her tutorial, and hopes it adds a little Sparkle to your day!




Feel free to stop by and see Heather's other projects and Tutorials using Art Glitter on her blog.
and her 


Friday, February 21, 2014

Art Glitter Hair Clip





Supply List
Art Glitter 280 Lime Rind Ultrafine Opaque glitter
Art Glitter 150 Poison Ivy Ultrafine Opaque glitter
Art Glitter 297 Hibiscus Ultrafine Transparent glitter
Art Glitter 304 Petal Pink Ultrafine transparent glitter
Art Glitter Dries Clear Glue
Art Glitter Ultra Fine Tip
Art Glitter Sticky Paper
The Robin's Nest Metallic Red Dew Drops
Darice Barrette
Bridal Ribbon Hobby Lobby
Plastic packaging
Creative Memories Leaf Punch
Hot Glue gun

One of the things Clare loves about Art Glitter is the range of colors!  She knows she can find a color glitter to match any project she is working on!  This will come in handy with wedding season approaching.  Clare used the perfect color Art Glitter to make beautiful barrettes for the flower girl. 
She started by covering a Darcy barrette with ribbon, gluing it in place with a hot glue gun.  Clare likes to use a low temp glue gun to avoid burns!  She then punched some leaves in Art Glitter Sticky paper.  She peeled off the protective layer first.   Clare finds it easy to just dip the leaf in the glitter on the side of the leaf in the light color green. 

Here Clare used 280 Lime Rind Ultrafine Opaque.  She then dipped the same leaf in the darker color green to cover the center of the leaf, this is 150 Poison Ivy. 





Once the leaves were made, she glued them on top of the ribbon on the barrette. 
For the flower, Clare cut a rolled rose using a Sizzix die and some plastic packaging from a embossing folder she bought:  reduce, reuse, recycle!  She has even used the plastic lid to the salad packaging from the grocery store to make flowers!  You can find more photos of the packaging flowers here.   While the rose was still flat, she covered the center of each petal using 297 Hibiscus Ultrafine Transparent glitter and the ultrafine glue tip, and Art Glitter Dries Clear glue. 
She made a second row of color, again using the ultrafine tip and 304 Petal Pink Ultrafine transparent glitter. 

Once these had dried completely, Clare rolled the rose and glued it at the center using a glue gun.  For the flower center she glued a dew drop from The Robin's Nest.  She gently bent the petals once the glue had dried completely.  She then attached the flower to the barrette on top of the leaves.  

To see more of Clare's work you can visit her blog at cricutcraftyclare.blogspot.com.

Tuesday, February 11, 2014

St. Patrick's Day Goodies Lucky Bottle


 Shamrock Clothes pin magnet


You will need the following:

Heather has done a talk through of how she created her projects on youtube.
Hope you enjoyed the video and Heather's St. Patrick's Day projects!
Feel free to stop by and see Heather's other projects and Tutorials using Art Glitter on her blog.
and her 

Sunday, February 9, 2014

Kiss Me Whether I'm Irish or not- Canvas




Supplies:
8 x 10 Canvas
Acrylic Paint
Vinyl cut with St Pattie's day word art
Art Glitter Dries clear Adhesive
Art Glitter Inca Gold Glitter
Paint Brush


Begin by painting an 8 x 10 canvas green with acrylic paint.

This is the vinyl word art I used for the canvas.  I purchased the file in the SIL store, and adjusted the size to fit the canvas.  It was cut using my silhouette cameo.
Apply the vinyl to the canvas.
Apply Art Glitter dies clear adhesive to select elements on the canvas.  I added dots and glittered the heart and the word "gold" 

Apply the glitter while the adhesive is still wet.  Please note that the adhesive will take longer to dry on the vinyl than it does on paper or the canvas.  You may want to let it set overnight before brushing off excess glitter.
Shake off excess glitter.  I like to use a soft brush (make up brush) to gently brush off the excess after removing the vast majority.
Thanks for stopping by to see my creations.
Missie Todd









Wednesday, February 5, 2014

Kiss Me I'm Irish

Supply List

Art Glitter Ultrafine Metal Tip
Art Glitter D40 Green Vibe Dazzlers
Art Glitter D42 Sherwood Dazzlers
Cricut Paper Lace Cartridge
Cricut Pretty Penants Cartridge
Silhouette Harp
Kelly green card stock
Lime green card stock
Yellow card stock
Brown Card Stock
Lime green glitter polka dot card stock
Black card stock
Embossing folder
Ribbon


After Clare's children had been in school a few years, they insisted on wearing green on St. Patrick's day.  Turns out, when they didn't wear green on that day, they were pinched.  Not wanting this holiday to have such a negative association, Clare decided it was time to use another St. Patrick's Day tradition at home and made a St. Patrick's Day Banner.

Clare started by creating a Celtic inspired banner using Cricut Pretty Pennants and Paper Lace cartridges.  She welded the two images in Cricut Craft Room software and cut them in green card stock.  
She covered some chipboard letters with Art Glitter Dries Clear Adhesive and used Green Gala Glitz for the letter "K" and "S".  For the letters "i" and "M" Clare used Green Vibe Dazzlers.  She also used Sherwood Dazzlers for the "s" in the rectangle.  For the harp below, Clare used a Silhouette file.






To see more of Clare's work, please visit her blog Cricut Crafty Clare.